{"title":"Seat Runners \u0026 Brackets","description":"\u003cp\u003eSliding runners and pivot brackets for mounting a replacement seat. Runners give fore and aft adjustment; a pivot bracket lets the seat tilt forward for access to the battery and service points underneath. Check the mounting centres on your seat pan before ordering.\u003c\/p\u003e","products":[{"product_id":"seat-mounting-rail-set-aqs005-fits-aqs120-aqs200-mower-seats","title":"Seat Runner Set AQS005 Slide Rails fits AQ Parts AQS120 AQS150 Mower Seats","description":"\u003cp\u003eA set of offset-arm sliding seat runners for ride-on mowers, garden tractors, utility vehicles, quads, and compact plant and turf equipment. Also known as slide rails or seat slides.\u003c\/p\u003e\n\n\u003cp\u003eEach runner comes in two halves — one bolts to the machine, the other to the seat, and they slide together. Once fitted they give the operator 150 mm of fore and aft adjustment over 11 lock positions, roughly 14 mm per notch, so the seat position can be set finely rather than in coarse steps.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eConfirmed to fit our own AQS120 and AQS150 seats.\u003c\/strong\u003e We hold both parts, so that is one fitment we can state without qualification. For any other seat or machine, work from the dimensions below.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMeasure your machine first.\u003c\/strong\u003e These runners are sold on their dimensions, not on a machine model list. The figure that decides whether they fit is the distance between the mounting centres on your machine. Compare it against the range below before ordering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHanded.\u003c\/strong\u003e The release arm is offset and sits on the right of the seat. If you need the adjuster on the left, our AQS010 straight-arm runners are the ones you want.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThey have a front and a back.\u003c\/strong\u003e The edge distances differ at each end, so fitting them reversed shifts every position by roughly 3 mm.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFixings included.\u003c\/strong\u003e A fixing kit of 4 × M8 × 20 mm round-head socket bolts and 8 washers is supplied for the runner-to-seat fixing, sized for our own seat pans. If you are fitting to another make of seat, check your pan thickness against that bolt length. Bolts for fixing the runners to your machine are not supplied, as the length needed varies from machine to machine. The runners take 8 mm bolts throughout.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003cbr\u003e\nModel AQS005\u003cbr\u003e\nArm type offset, release arm on the right\u003cbr\u003e\nSupplied as a set of two runners, two halves per side\u003cbr\u003e\nOverall length 304 mm\u003cbr\u003e\nSeat-side rail length 280 mm\u003cbr\u003e\nWidth 34.5 mm\u003cbr\u003e\nThickness 21.5 mm\u003cbr\u003e\nTravel 150 mm over 11 lock positions\u003cbr\u003e\nAdjustment about 14 mm per notch\u003cbr\u003e\nBolt holes 8 mm throughout\u003cbr\u003e\nMaterial steel\u003cbr\u003e\nWeight 1,200 g per set\u003cbr\u003e\nCondition New\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMounting centres — the dimension to check\u003c\/strong\u003e\u003cbr\u003e\nMachine side, seven fixing points, four of them slotted: fixed centres of 150, 180, 200, 203, 230, 250 and 285 mm, with intermediate spacings achievable through the slots. Maximum span 284 mm.\u003cbr\u003e\nSeat side, six fixing points, two of them slotted: centres up to about 254 mm, slot to slot 241 to 254 mm, which suits the 250 mm depth pattern on our AQS120 and AQS150 seats.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAQS005 or AQS010?\u003c\/strong\u003e Neither supersedes the other. AQS005 reaches down to 150 mm centres, which AQS010 does not, so it suits tight or compact installations. AQS010 reaches 290 and 300 mm, which these do not, so it suits larger machines.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBox contents:\u003c\/strong\u003e 1 × set of AQS005 seat runners, 4 × M8 × 20 mm bolts, 8 × washers.\u003c\/p\u003e\n\n\u003cp\u003eMeasure the mounting centres on your machine, and the centres on the underside of your seat pan, then check both against the figures above. If you would like help, message us with those measurements, or a photo of your existing mounting arrangement, and we are happy to check before you buy.\u003c\/p\u003e\n\n\u003cp\u003eAQ Parts is an independent supplier and is not affiliated with or endorsed by any OEM. All manufacturer names and part numbers are quoted for reference only, to identify compatibility.\u003c\/p\u003e\n\n\u003cp\u003eUK stock. Orders placed before 2pm are despatched the same day from our Fareham warehouse, by DPD or Parcelforce. Free UK delivery. 30-day returns on unused items in original packaging.\u003c\/p\u003e","brand":"AQ Parts","offers":[{"title":"Default Title","offer_id":62497792524675,"sku":"AQ-1054-SET","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/2922\/0483\/files\/AQ-1054-1PK_1.png?v=1789250821"},{"product_id":"seat-mounting-rail-set-aqs010-fits-aqs150-aqs180-mower-seats","title":"Seat Runner Set AQS010 Slide Rails fits AQ Parts AQS180 AQS200 Mower Seats","description":"\u003cp\u003eA set of straight-arm sliding seat runners for ride-on mowers, garden tractors, utility vehicles, quads, and compact plant and turf equipment. Also known as slide rails or seat slides.\u003c\/p\u003e\n\n\u003cp\u003eEach runner comes in two halves — one bolts to the machine, the other to the seat, and they slide together. Once fitted they give the operator 203 mm of fore and aft adjustment over 11 lock positions, roughly 18 mm per notch, so the seat position can be set finely rather than in coarse steps.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eConfirmed to fit our own AQS180 and AQS200 seats.\u003c\/strong\u003e We hold both parts, so that is one fitment we can state without qualification. For any other seat or machine, work from the dimensions below.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMeasure your machine first.\u003c\/strong\u003e These runners are sold on their dimensions, not on a machine model list. The figure that decides whether they fit is the distance between the mounting centres on your machine. Compare it against the range below before ordering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHanded.\u003c\/strong\u003e The release arm is straight and sits on the left of the seat. If you need the adjuster on the right, our AQS005 offset-arm runners are the ones you want.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThey have a front and a back.\u003c\/strong\u003e The edge distances differ at each end, so fitting them reversed shifts every position by roughly 3 mm.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFixings included.\u003c\/strong\u003e A fixing kit of 4 × M8 × 20 mm round-head socket bolts and 8 washers is supplied for the runner-to-seat fixing, sized for our own seat pans. If you are fitting to another make of seat, check your pan thickness against that bolt length. Bolts for fixing the runners to your machine are not supplied, as the length needed varies from machine to machine. The runners take 8 mm bolts throughout.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003cbr\u003e\nModel AQS010\u003cbr\u003e\nArm type straight, release arm on the left\u003cbr\u003e\nSupplied as a set of two runners, two halves per side\u003cbr\u003e\nOverall length 360 mm\u003cbr\u003e\nSeat-side rail length 321 mm\u003cbr\u003e\nWidth 34.5 mm\u003cbr\u003e\nThickness 21.5 mm\u003cbr\u003e\nTravel 203 mm over 11 lock positions\u003cbr\u003e\nAdjustment about 18 mm per notch\u003cbr\u003e\nBolt holes 8 mm throughout\u003cbr\u003e\nMaterial steel\u003cbr\u003e\nWeight 1,455 g per set\u003cbr\u003e\nCondition New\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMounting centres — the dimension to check\u003c\/strong\u003e\u003cbr\u003e\nMachine side, ten fixing points, six of them slotted: fixed centres of 180, 200, 203, 230, 250, 285, 290 and 300 mm, with near-continuous adjustment from about 100 mm to 339 mm thanks to the slots. Maximum span 339 mm.\u003cbr\u003e\nSeat side, eight fixing points, three of them slotted: centres of 200, 203, 250, 285 and 290 mm, which covers every pattern across our seat range.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAQS010 or AQS005?\u003c\/strong\u003e Neither supersedes the other. AQS005 reaches down to 150 mm centres, which these do not, so it suits tight or compact installations. AQS010 reaches 290 and 300 mm, which AQS005 does not, so it suits larger machines.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBox contents:\u003c\/strong\u003e 1 × set of AQS010 seat runners, 4 × M8 × 20 mm bolts, 8 × washers.\u003c\/p\u003e\n\n\u003cp\u003eMeasure the mounting centres on your machine, and the centres on the underside of your seat pan, then check both against the figures above. If you would like help, message us with those measurements, or a photo of your existing mounting arrangement, and we are happy to check before you buy.\u003c\/p\u003e\n\n\u003cp\u003eAQ Parts is an independent supplier and is not affiliated with or endorsed by any OEM. All manufacturer names and part numbers are quoted for reference only, to identify compatibility.\u003c\/p\u003e\n\n\u003cp\u003eUK stock. Orders placed before 2pm are despatched the same day from our Fareham warehouse, by DPD or Parcelforce. Free UK delivery. 30-day returns on unused items in original packaging.\u003c\/p\u003e","brand":"AQ Parts","offers":[{"title":"Default Title","offer_id":62497792590211,"sku":"AQ-1062-SET","price":32.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/2922\/0483\/files\/AQ-1062-1PK_1.png?v=1789250879"},{"product_id":"seat-pivot-bracket-and-pin-fits-john-deere-m168593-seat-support-x300-x350-x370-x500-x540-x580-x750","title":"Seat Pivot Bracket and Pin Fits John Deere M168593 Seat Support X300 X350 X370 X500 X540 X580 X750","description":"\u003cp\u003eSeat pivot bracket and pin, allowing the seat to tilt forward on its base.\u003c\/p\u003e\u003cp\u003eBolts to the seat base plate on 200mm to 205mm centres. One fixing hole is slotted, so it takes either the 200mm or the 203mm (8in) pattern without modification.\u003c\/p\u003e\u003cp\u003eSupplied complete with the pin and R-clip. Fixing bolts are not included – reuse your originals or match to 8mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment – verified.\u003c\/strong\u003e Fits the John Deere M168593 seat support. Verified on the X370. The following models use the same seat support:\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eX300 series:\u003c\/strong\u003e X300, X300R, X304, X305R, X310, X320, X324, X330, X340, X350, X350R, X354, X360, X370, X380, X384, X390, X394\u003cbr\u003e\u003cstrong\u003eX500 series:\u003c\/strong\u003e X500, X530, X534, X540, X570, X580, X584, X590\u003cbr\u003e\u003cstrong\u003eX700 series:\u003c\/strong\u003e X750, X754, X758\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment – likely, please check first.\u003c\/strong\u003e The overall length and pin length also match the bracket fitted to X485, X495, X575, X585, X595, X710, X720, X724, X728, X729, X730, X734, X738, X739, X740, X744, X748, X749 and X950R.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck before ordering.\u003c\/strong\u003e Some of those machines have a bracket with three holes in the pivot boss, giving three height positions. This bracket has one, at 25mm above the base plate.\u003c\/p\u003e\u003cp\u003ePlease confirm fitment against your original part before ordering, or message us with your model details and we will check for you.\u003c\/p\u003e","brand":"AQ Parts","offers":[{"title":"Default Title","offer_id":62580383351171,"sku":"AQ-1042-1PK","price":39.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/2922\/0483\/files\/AQ-1042-1PK_1.png?v=1789283130"}],"url":"https:\/\/aq-parts.co.uk\/collections\/seat-runners-brackets.oembed","provider":"AQ Parts","version":"1.0","type":"link"}