AQS200 Yellow High Back Vinyl Seat

The AQS200 is a high back universal-pattern seat in hard-wearing yellow vinyl, for replacing worn, cracked, split or faded seating on ride-on mowers, garden tractors, utility vehicles and compact turf equipment. It is the largest seat in our range, suited to bigger machines where a low or mid back seat would sit too low.

Choose 1x seat for the seat on its own, or 1x seat with runners for the seat supplied with a set of AQS010 sliding runners and the fixing kit to bolt them on. Also available as a two-pack.

Please read before ordering

This is a universal-pattern seat, described by its own dimensions. It may suit machines from makers including John Deere and Kubota — but that is subject to checking the hole pattern, dimensions and mounting layout against your original. It is not sold as a model-specific replacement for any particular machine.

High back, static seat. At 535 mm overall height this is a high back seat — noticeably taller than a mid or low back, so check the height and any cab or ROPS clearance against your original before ordering. It is also a fixed-base seat, not a suspension seat.

Switch aperture. A plain 70 mm round aperture, with no pilot holes for screw fixings. A screw-mount switch would need its own fixing holes drilling. No seat switch is supplied.

Mounting. The base has multiple fixing points to suit a range of mounting positions. With the runner option, the AQS010 runners give ten machine-side fixing points, six of them slotted, with fixed centres of 180, 200, 203, 230, 250, 285, 290 and 300 mm and near-continuous adjustment from about 100 mm to 339 mm.

Specifications

• Overall width 475 mm
• Overall depth 570 mm
• Overall height 535 mm
• Back type: high back
• Switch aperture 70 mm round, no pilot holes
• Colour: yellow vinyl over a moulded base, multiple fixing points, drain hole
• Seat weight 4,500 g; runner set 1,455 g; complete kit 5,955 g; two-pack 9,000 g
• Condition: new

What you receive

1x seat — 1 × AQS200 seat. Seat switch, runners, brackets and mounting hardware are not included.

1x seat with runners — 1 × AQS200 seat, 1 × set of AQS010 runners (straight arm, release arm on the left, 203 mm of travel over 11 lock positions), 4 × M8 × 20 mm round-head socket bolts and 8 × washers for bolting the runners to the seat. Seat switch not included, and neither are the bolts for mounting the runners to your machine, as the length needed varies.

2x seats — 2 × AQS200 seat. Seats only; you would need one runner set per seat.

Reference numbers

Buyers often come to this seat looking for John Deere AM141482, or Milsco XB200. These are quoted for identification only. Please check the dimensions above against your original before ordering.

AQ Parts Ltd is an independent supplier and is not affiliated with or endorsed by any OEM. All manufacturer names and part numbers are quoted for reference only, to identify compatibility.