AQS150 Yellow Mid Back Vinyl Seat

The AQS150 is a mid back universal-pattern seat in hard-wearing yellow vinyl, for replacing worn, cracked, split or faded seating on ride-on mowers, garden tractors, utility vehicles and compact turf equipment.

It is the most adaptable seat in our range for mounting: four widthways hole spacings across two groups on one pan, including a front pair that suits a pivot bracket, so it fits a wider spread of machines than a single-pattern seat.

Choose 1x seat for the seat on its own, or 1x seat with runners for the seat supplied with a set of AQS005 sliding runners and the fixing kit to bolt them on.

Please read before ordering

This is a universal-pattern seat, described by its own dimensions. It is bought as a replacement on machines from makers including John Deere, Toro and Kubota — but that is subject to checking the hole pattern, dimensions and mounting layout against your original. It is not sold as a model-specific replacement for any particular machine.

Switch aperture. A 70 mm round aperture. No seat switch is supplied.

Mounting. The pan carries two hole groups. At the front it is drilled across at 203 and 180 mm; at the back, at 285 and 230 mm. Front to back the groups measure 250 and 290 mm. The front pair at 203 mm is what suits a pivot bracket. With the runner option, the AQS005 runners give seven machine-side fixing points, four of them slotted, with fixed centres of 150, 180, 200, 203, 230, 250 and 285 mm and a maximum span of 284 mm.

Specifications

• Overall width 455 mm
• Overall depth 570 mm (seat base 430 mm front to back)
• Overall height 430 mm
• Back type: mid back
• Switch aperture 70 mm round
• Seat mounting hole centres 203 and 180 mm across at the front, 285 and 230 mm at the back; 250 and 290 mm front to back
• Pivot bracket spacing 203 mm, front pair
• Colour: yellow vinyl over a corrosion-resistant moulded base, multiple fixing points, drain hole
• Seat weight 4,500 g; runner set 1,200 g; complete kit 5,700 g
• Condition: new

What you receive

1x seat — 1 × AQS150 seat. Seat switch, runners, brackets and mounting hardware are not included.

1x seat with runners — 1 × AQS150 seat, 1 × set of AQS005 runners (offset arm, release arm on the right, 150 mm of travel over 11 lock positions), 4 × M8 × 20 mm round-head socket bolts and 8 × washers for bolting the runners to the seat. Seat switch not included, and neither are the bolts for mounting the runners to your machine, as the length needed varies.

Reference numbers

Buyers often come to this seat looking for John Deere AUC13500. That number is quoted for identification only. Please check the dimensions above against your original before ordering.

AQ Parts Ltd is an independent supplier and is not affiliated with or endorsed by any OEM. All manufacturer names and part numbers are quoted for reference only, to identify compatibility.